> DBRC-2A | Two Channel Passive Direct Input Box with RCA and 1/8" Stereo Inputs
Click to Enlarge
DBRC-2A | Two Channel Passive Direct Input Box with RCA and 1/8' Stereo Inputs
DBRC-2A | Two Channel Passive Direct Input Box with RCA and 1/8" Stereo Inputs
Add to Cart
Add to Wish List
This DI is a great item for a DJ with an RCA output sub mixer or anyone that wants to hook a laptop output to the main mix board. It is equipped with two RCA jacks and a parallel 1/8" stereo jack for inputs. The 1/8" jack is wired with the ring to channel 1 and the tip to channel 2 with sleeve to ground. On the output side, there is one XLR jack for each channel to send to the board. Also there is a separate ground lift switch and a –0dB, -20dB, -40dB attenuator switch on each input channel.
The internal splitting transformer used in the DBRC-2A is good quality and is a key feature. The quality of the internal splitting transformer is the key to a good performing D.I. Box. The transformers used in the EWI DBRC-2A are manufactured to strict EWI tolerances designed specifically for this application.
The box is extruded aluminum. The box has a nice feature in that it is built so multiple boxes can be hooked together physically either side-by-side or one on top the other. There are 4 nice little rubber feet on the bottom to help keep it from sliding around on a slick surface or damage a nice surface. The box is extremely tough.
RCA and 1/8" stereo inputs
Three position attenuation switch on each channel
Ground lift switch on each channel
Computer or DJ sub mixer outputs to main mix console.
Attenuation selectable signal conversion between RCA or stereo 1/8" unbalanced Hi Z signals and XLR balanced Low Z signals.
Inputs: RCA and 1/8" Stereo jacks, 50k ohm
Max input voltage: 32v
Balanced XLR (M) 600 ohm to mix console
Attenuator: -0, -20, and -40 dB
Freq. Response: 15Hz to 30KHz
Dimensions: 5.118” w x 1.742”h x 3.200”d
Weight: 1.15 lbs.
Shipping weight: 3 lbs.
Warranty: 3 years covering mfg. defects.
Recently Viewed Items